Pressure and Flow Tester

The first step to a successful irrigation system, is to ensure you have a sufficient pressure and flow. This essential tool lets you test pressure at your mains connection point, ensuring optimal performance throughout your system. Whether you're managing a small garden or a large commercial irrigation network, knowing your system's pressure is crucial to maintaining efficiency and preventing costly issues. Use a precise measuring container to check flow at different pressure ratings.

Key Features:

• Connection: 3/4" female for direct tap connection
• Pressure Range: 0-11 BAR / 0-160 PSI for precise readings
• Gauge: Oil-filled for enhanced durability and accuracy

Having the right pressure tester means you can monitor and adjust your irrigation system as needed, ensuring water is distributed evenly and efficiently across your property. Don’t leave your irrigation to chance – take proactive control with this high-quality, reliable tool. Perfect for both professionals and DIY enthusiasts looking to maintain a healthy, well-functioning system year-round.

How to test flow -

Steps: 1. Connect desired watering appliance (such as hand nozzle, or sprinkler) to your hose.

2. Prepare bucket and stopwatch.

3. Open tap fully, and place in bucket when full flow is achieved.

4. Start stopwatch, then fill bucket.

5. Stop stopwatch when bucket is full.

6. Close tap, and set aside bucket.

7. Use the following formula to work out Flowrate: LPM=10x60/T

Explanation: Litres Per Minute (LPM) = 10Litre Bucket, multiplied by 60, divided by seconds taken to fill bucket.

Example: 10x60/50=12 "If a 10 litre bucket takes 50secs to fill, your flowrate is 12 litres per minute"